Guides · 14 November 2026 · 4 min read
Boutique hotels: balancing room types and public space
Why one room type is a mistake, how the bathroom sets the room, what public areas are really for, corridors, lighting scenes, sockets and work surfaces, blackout and sound, and designing for replacement.
A boutique hotel competes on character, and character is produced by decisions that are made long before the furniture is chosen.
One room type is a mistake
Identical rooms simplify construction and cost occupancy. A building with varied floor plates should offer varied rooms: a compact single for the business traveller, a larger room with a seating area, one or two rooms with a view that justify a higher rate. Variety also lets the hotel sell the same night to three different guests.
The bathroom sets the room
Guests judge a hotel room by its bathroom more than by its bed. Water pressure, drainage that does not smell, a shower that does not flood the floor, somewhere to put a washbag and a mirror that works are worth more than an expensive finish. In small rooms, a glass-walled bathroom buys light and space, at the cost of acoustics — a decision to make deliberately, not by default.
Public areas are what separate the hotel
A boutique hotel is remembered for its lobby, bar or courtyard. These spaces have to work at different times of day — arrival at midday, coffee at four, drinks at nine — and they need a lighting scene for each. A lobby lit at one level all day feels wrong at two of those three times.
Corridors are wasted in most projects
Corridors are the first thing a guest walks after check-in and are usually a budget victim: flat light, a long tunnel and no daylight. Breaking the length with light, a change of material, or a niche at each room door costs little and changes the arrival entirely.
Lighting is half the room
Bedside control that reaches the lamp without getting up, a light at the desk, a soft low-level light to the bathroom at night, and one switch by the door that turns everything off. Guests do not notice good lighting; they remember bad lighting.
Sockets, charging and a surface to work on
Two sockets and a USB point each side of the bed, power at the desk, and one free surface large enough for a laptop. In hotels built before 2015 this is the most common refurbishment request, and it is cheap to solve.
Curtains, blackout and sound
Blackout means blackout, including the edges: a light leak at the side of a curtain wakes guests at six. Heavy curtains also absorb corridor noise, and a door seal does more for sleep than any wall finish.
Durability and change
A hotel room is used around three hundred nights a year. Finishes are chosen for wear at hand height and foot level, and the design should allow a soft refresh — textiles, lighting, artwork — at year five without touching the construction.
Frequently asked
-
Around 16–18 m² including the bathroom works if the layout is designed carefully and storage is built in. Below that, the room has to be a deliberate micro concept rather than a compromised standard room.
-
Design three to five months depending on the number of room types; construction six to twelve months. Prototyping one room before the rest is standard practice and saves far more than it costs.
-
For anything above about twenty rooms, yes. It tests the joinery, the lighting, the bathroom detail and the housekeeping route before the same mistake is repeated forty times.
WRITTEN BY Yakup Sutay — Süper Admin
Our work on this
ALL PROJECTS →GUIDES
Let us see together what your space could become
Every space has something it is trying to say, and good design makes it audible. What that is in yours depends on the measurements, the light and the way you live in it. Share a plan or a few photographs and let us talk about what is possible and what character the space could take on. Ten minutes on the phone usually settles most of it.
OFFICE · Ziya Gökalp Mah. Süleyman Demirel Bulvarı,, Mall of İstanbul The Offic...